"Cordstrap" and "Cordlash" sound almost the same, and both secure cargo — so they're constantly mixed up when it's time to order. But they do two different jobs. Cordstrap composite strapping bundles and unitises a load; Cordlash woven lashing ties a load down to the transport unit. This guide explains each, the strengths available, and how to pick the right one.
Standard Cordstrap: composite (CC) strapping
Cordstrap composite strapping — the "CC" range — is a GL-certified composite polyester strap that replaces steel banding for bundling, unitising and palletising. Together with a galvanised steel buckle it holds a strong, reliable joint, and because it's non-abrasive it won't damage goods or rust like steel. It's the everyday choice for closing and securing loads around the product itself.
The range steps up in strength (rated in daN) as your load gets heavier:
- Light bundling: CC55, 16mm (880 daN) — a top seller for general palletising.
- Medium loads: CC65, 19mm (1,000 daN).
- Heavier loads: CC86, 25mm (1,400 daN).
- Heavy-duty securing: CC105, 32mm (2,600 daN) — the strongest in the composite range.
Match the strap to a Cordstrap buckle of the same width — CB5 (16mm) through to CB10 (32mm) — and tension it with a hand or mobile dispenser. See the full range in Strapping.
Cordlash: woven lashing
Cordlash is a woven polyester lashing belt that does a different job — it secures cargo to the container, flat rack, railcar or ship so the whole load can't shift in transit. It runs to much higher strengths than composite strapping (from 4,000 daN up to 20,000 daN) and is the right tool for tying down heavy or high-value freight. Browse it in the Cordstrap collection, and see our full guide to Cordlash woven lashing.
Strapping vs lashing — which do you need?
| Factor | Cordstrap CC strapping | Cordlash woven lashing |
|---|---|---|
| Job | Bundles, unitises and closes a load | Ties a load down to the transport unit |
| Applied | Around the product or pallet | From the cargo to container walls/floor |
| Strength | 680–2,600 daN | 4,000–20,000 daN |
| Typical use | Palletising, bundling, steel-band replacement | Securing heavy cargo in containers & flat racks |
| Closed with | CB-series buckle | HDB-series lashing buckle |
The quick answer
If you're bundling, unitising or palletising a load — or replacing steel banding — you want Cordstrap CC composite strapping, sized from CC55 for light work up to CC105 for heavy-duty. If you're securing cargo inside a container or on a flat rack so it can't move in transit, you want Cordlash woven lashing. Many exporters use both: strapping to unitise the pallet, lashing to secure it in the container. Always pair each with its matching buckle. Trade accounts get tiered pricing — and if you're unsure, email sales@nzpackaging.nz with your load type, weight and how it's shipped and we'll spec the right system.
Frequently asked questions
What's the difference between Cordstrap and Cordlash?
Cordstrap composite strapping bundles and unitises a load around the product; Cordlash woven lashing secures the whole load to the transport unit. Strapping runs 680–2,600 daN; lashing runs much higher, 4,000–20,000 daN.
Can composite strapping replace steel banding?
Yes — Cordstrap CC strapping is a direct, safer replacement for steel banding. It's non-abrasive, won't rust or mark goods, and is safer to apply and remove.
Which strength (daN) do I need?
For strapping: CC55 (880 daN) for light bundling up to CC105 (2,600 daN) for heavy loads. For lashing, strength depends on cargo weight and restraint — email us your details and we'll confirm.
Do I need a special tool?
Composite strapping is tensioned with a hand tool or dispenser and closed with a CB buckle; woven lashing uses a matching tensioner and HDB buckle. We can supply the tools alongside the strap.
