Kemsol Bac-Tech Twin Chain Quat Sanitiser

Twin chain quaternary liquid cationic germacide developed for the disinfecting of food production plants, including machines, floors, walls, all food premises and any other area that requires disinfecting.

Directions: MPI Approved C43 & Direct Inspected MPI Multi-site Facilities Open Hard Surface Sanitising: Use at a ratio of 1:100 (1% solution, 10ml per litre, 400PPM) to 1:200 (0.5% solution, 5ml per litre, 200PPM). Foot Baths: Use at a ratio of 1:50 (2% solution, 20 ml per litre, 800PPM). Test strip verification recommended to ensure min QAC level of 400PPM is maintained. Food Plant Area Hard Surface Foam Sanitising: Use at a ratio of 1:100 (1% solution, 10ml per litre). Mould and Mildew Control: Use at a ratio of 1:20 - 1:5 (5 - 20% solution, 50 - 200ml per litre). Clean the surface to be disinfected. Dilute with water. Water blast (preferably with a foaming nozzle) or brush on machine or surface to be disinfected. Leave for 15 minutes for disinfection to take place. Rinse off with water. May be used at 1:200 dilution as a no-rinse sanitiser in fish processing applications. In the case of operators that only process fish, rinsing after application of this product is not necessary, however food contact surfaces must still be thoroughly drained to minimise residues. For all other operators, food surfaces must be thoroughly rinsed with potable water before production starts. A lower dilution rate may be used in accordance with a site’s specific stated QAC standards, where a verifiable testing program has been substantiated. General non-food contact surfaces may be used in a no-rinse capacity. May also be used to sanitise open work surfaces such as work tables that contact food, providing these can be rinsed and drained completely, in order to prevent pooling of detergent residues. Because the product contains QAC sanitiser, do not use as a Clean-In-Place (CIP) cleaner for enclosed systems, as pooling in such systems may lead to contamination by detergent residues. Incidental food contact surfaces should be wiped with a clean, damp cloth or paper towel. Non-MPI Approved / Inspected Facilities Dilute with potable water. General Hard Surface Sanitising: Use at a ratio of 1:100 (1% solution, 10ml per litre, 400PPM) to 1:500 (0.2% solution, 2ml per litre, 80PPM) with a minimum contact time of 1 minute. Foot Baths: Use at a ratio of 1:50 (2% solution, 20 ml per litre, 800PPM). Mould and Mildew Control: Use at a ratio of 1:20 - 1:5 (5 - 20% solution, 50 - 200ml per litre).